Cisco Cisco ASR 5000

Page of 640
Operator Policy   
▀  Operator Policy Configuration 
 
▄  SGSN Administration Guide, StarOS Release 18 
   
      end 
Notes: 
 
It is optional to configure an IMEI profile. An operator policy can include IMEI profiles and/or APN profiles. 
 
This profile will only become valid when it is associated with an operator policy. 
APN Remap Table Configuration 
This section provides the configuration example to create an APN remap table and enter the apn-remap-table 
configuration mode.  
Use the 
apn-remap-table
 commands to define how APNs are to be handled when the requests either do or do not 
include an APN.  
The example below includes some of the more commonly configured profile parameters with sample variables that you 
will replace with your own values. 
configure 
   apn-remap-table <table_name
      apn-selection-default first-in-subscription 
      wildcard-apn pdp-type ipv4 network-identifier <apn_net_id
      blank-apn network-identifier <apn_net_id
(SGSN only)
 
      end 
Notes: 
 
The 
apn-selection-default first-in-subscription
 command is used for APN redirection to provide 
“guaranteed connection” in instances where the UE-requested APN does not match the default APN or is 
missing completely. In this example, the first APN matching the PDP type in the subscription is used. The first-
in-selection keyword is an MME feature only.  
 
Some of the commands represented in the example above are common and some are product-specific. Refer to 
the APN-Remap-Table Configuration Mode chapter in the Command Line Interface Reference for command 
details and variable options. 
 
This profile will only become valid when it is associated with an operator policy. 
Operator Policy Configuration 
This section provides the configuration example to create an operator policy and enter the operator policy configuration 
mode.  
Use the commands in this mode to associate profiles with the policy, to define and associate APNs with the policy, and 
to define and associate IMEI ranges. Note: IMEI ranges are supported for SGSN only. 
The example below includes sample variable that you will replace with your own values. 
configure