Cisco Cisco ASR 5000

Page of 640
Quality of Service (QoS) Management for SGSN   
▀  Quality of Service Management 
 
▄  SGSN Administration Guide, StarOS Release 18 
   
Figure 73.  QoS Mapping from SGSN to UE/RNC 
 
QoS Handling Scenarios 
Listed below are various QoS handling scenarios and QoS Mapping for each of the scenarios:  
Scenario-1:
 
Description of the scenario: 
1.  Attach is received from an EPC capable UE. 
2.  The HLR subscription does not have EPS subscription data. Only GPRS subscription is present.  
3.  Activate a PDP context with all QoS parameters set to “subscribed”. 
QoS mapping for the scenario: 
If S4 is the selected interface, then the subscribed MBR is mapped to APN AMBR. The EPS bearer QoS MBR is set to 
subscribed MBR (for conversational and streaming class bearers). For non-GBR bearers the EPS bearer QoS MBR is set 
to “0”. If the traffic class is conversational or streaming, then the EPS bearer QoS GBR is set to subscribed GBR.  
A detailed list of mapping: 
1.  APN AMBR = Subscribed MBR
 
2.  Bearer QoS – PVI = Taken from local policy [use call-control-profile qos gn-gp config]
 
3.  Bearer QoS – PCI = Taken from local policy [use call-control-profile qos gn-gp config]
 
4.  Bearer QoS – PL = Taken from local policy [use call-control-profile qos gn-gp config]
 
5.  Bearer QoS – QCI = Mapped from subscribed traffic class
 
6.  Bearer QoS – MBR UL and DL = Mapped from subscribed MBR + MBR-Extended for UL and DL
 
7.  Bearer QoS – GBR UL and DL = Zero for interactive or background traffic. For streaming or conversational it is 
mapped from subscribed GBR + Ext.GBR UL / DL
 
References: