Cisco Cisco Tunnel Terminating Gateway (TTG)
show cscf
show cscf peer-servers full ▀
Statistics and Counters Reference, StarOS Release 18 ▄
3497
show cscf peer-servers full
Table 300.
show cscf peer-servers full
Command Output Descriptions
Field
Description
Peer-Server name
The name of the peer server group.
Context
The context in which the peer server group configuration resides.
Server type
The type of servers in the peer server group.
Hunting-method
The hunting method used by the servers in the peer server group.
server
The name of the peer server.
Address
The IP address of the peer server expressed in IPv4 or IPv6 dotted decimal notation.
domain
The domain name of the peer server.
Monitor status
The monitoring status of the peer servers as determined by the CLI command Enabled/Disabled.
monitor-interval (seconds)
The time period, in seconds, between monitor intervals.
monitor-message
The SIP message (OPTIONS) to be sent after each monitoring interval.
monitor-response-timer
(seconds)
(seconds)
The response wait timer, in seconds, for each monitor message.
Server mode
The mode of the peer server as determined by the CLI command Active/Standby.
Server status
The status of the peer server. Possible statuses are:
OUT_OF_SERVICE — Peer server mode changed to standby through CLI command.
AVAILABLE — Peer server mode is Active and peer server sends response to monitor
message.
message.
UNAVAILABLE— Peer server mode is Active, however, peer server does not send
response to monitor message.
response to monitor message.
Network session template
Binds the nw-session-template name with the peer server.
IMS Capable
Indicates if the peer server is ims-capable or not.
Request Rx
The number of requests received by the sip-as peer server from S-CSCF during load balancing.