Cisco Cisco Packet Data Gateway (PDG) Leaflet
Content Filtering Policy Configuration Mode Commands
▀ failure-action
▄ Cisco ASR 5x00 Command Line Interface Reference
2134
Important:
Static-and-Dynamic Content Filtering is only supported in 9.0 and later releases.
redirect-url url
Redirects the subscriber to the specified URL.
url
must be an alphanumeric string of 1 through 1023 characters, in the following format:
http://search.com/subtarg=#HTTP.URL#
terminate-flow
Terminates the TCP connection gracefully between the subscriber and external server and sends a TCP FIN
to the subscriber and a TCP RST to the server.
to the subscriber and a TCP RST to the server.
www-reply-code-and-terminate-flow reply_code
Sets action as terminate-flow with a reply code that is a 3-digit integer from 100 through 599.
edr edr_format_name
Specifies the name of a pre-defined EDR format to be generated on the content filtering action as an
alphanumeric string of 1 through 63 characters.
alphanumeric string of 1 through 63 characters.
Usage
Use this command to set the failure action to take when no content filtering analysis result is available to
analyze for
analyze for
analyze priority priority category category_string
command.
Example
The following command sets the failure action as
discard
:
failure-action discard