Cisco Cisco Packet Data Gateway (PDG) Leaflet
GTPP Server Group Configuration Mode Commands
▀ gtpp mbms interval
▄ Cisco ASR 5x00 Command Line Interface Reference
5838
gtpp mbms interval
Configures the interval duration for interval-based triggers for GTPP MBMS Charging Data Record (G-MBMS-CDR)
generation.
generation.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
gtpp mbms interval duration_sec
no gtpp mbms interval
no
Disables the interval-based trigger for G-MBMS-CDR generation for MBMs user service data.
duration_sec
Specifies the normal time duration (in seconds) that must elapse before closing an accounting record provided
that any or all of the following conditions occur:
that any or all of the following conditions occur:
Downlink traffic volume is reached within the time interval
Tariff time based trigger occurred within the time interval
Data volume (up and downlink) bucket trigger occurred within the time interval
duration_sec
is an integer from 60 through 40,000,000. Default: Disabled
Usage
Use this command to configure the G-MBMS-CDR generation triggers for MBMS user data service.
Example
The following command configures the interval-based trigger to generate G-MBMS-CDRs in every
60
seconds:
gtpp mbms interval 60