Cisco Cisco Packet Data Gateway (PDG) Leaflet
RS-232 Port Configuration Mode Commands
terminal ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
7883
stopbits { 1 | 2 }
Default: 1
Specifies the number of stop bits between each transmitted character.
Specifies the number of stop bits between each transmitted character.
Usage
Sets the SPIO console port parameters for communication with the terminal device.
Example
The following command sets the SPIO’s console port. The terminal must support these values.
terminal carrierdetect off databits 7 flowcontrol hardware parity even
speed 115200 stopbits 1
speed 115200 stopbits 1