Cisco Cisco Packet Data Interworking Function (PDIF) Leaflet
MME Service Configuration Mode Commands
local-cause-code-mapping apn-mismatch ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
6913
local-cause-code-mapping apn-mismatch
Configures the reject cause code to send to a UE when an APN mismatch occurs.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping apn-mismatch emm-cause-code { eps-service-not-allowed-in-this-
plmn | esm-failure esm-cause-code unknown-apn | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
plmn | esm-failure esm-cause-code unknown-apn | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
default local-cause-code-mapping apn-mismatch
default local-cause-code-mapping apn-mismatch
Returns the cause code mapping to its default value:
esm-failure esm-cause-code unknown-apn
.
apn-mismatch emm-cause-code { eps-service-not-allowed-in-this-plmn | esm-failure
esm-cause-code unknown-apn | no-suitable-cell-in-tracking-area | plmn-not-allowed
| roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
esm-cause-code unknown-apn | no-suitable-cell-in-tracking-area | plmn-not-allowed
| roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed }
Specifies the EPS Mobility Management (EMM) cause code to return when an APN mismatch occurs.
eps-service-not-allowed-in-this-plmn
esm-failure esm-cause-code unknown-apn
- Default.
For the
esm-failure
cause code only, the
unknown-apn
ESM code is also reported to the UE.
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
Usage
Use this command to configure the cause code returned to a UE when an APN mismatch occurs, such as
when an APN is present in the HSS subscription but the HSS subscription for this IMSI has other APNs
present in the subscription. By default, the MME sends the UE the #23 - ESM Failure cause code for this
condition.
when an APN is present in the HSS subscription but the HSS subscription for this IMSI has other APNs
present in the subscription. By default, the MME sends the UE the #23 - ESM Failure cause code for this
condition.