Cisco Cisco ASR 5500 Administrator's Guide
AAA Introduction and Overview
Supported Features ▀
Cisco ASR 5x00 AAA Interface Administration and Reference ▄
19
Currently in the deployment of the Diameter applications ( Gx, Gy, etc.), many operators make use of “
max-
outstanding <number>
” as a means of achieving some rate-limiting on the outgoing control traffic. With RLF in
place, this is no longer required since RLF takes care of rate-limiting in all cases. If RLF is used and
max-
outstanding
is also used, there might be undesirable results.
Important:
If RLF is being used with an "
diameter endpoint
", then set the
max-outstanding
value of the
peer to be 255.
To use the template, Diameter or any other applications must be associated with the template. The RLF provides only
the framework to perform the rate limiting at the configured Transactions Per Second (TPS). The applications (like
Diameter) should perform the configuration specific to each application.
the framework to perform the rate limiting at the configured Transactions Per Second (TPS). The applications (like
Diameter) should perform the configuration specific to each application.