Cisco Cisco ASR 5000 Administrator's Guide
HeNB-GW Service Configuration Procedures
▀ Alarm and Alert Trap Configuration
▄ Cisco ASR 5x00 Home eNodeB Gateway Administration Guide
46
Alarm and Alert Trap Configuration
To enable and configure the SNMP Traps to generate alarms and alerts from system for various events and thresholds in
HeNB-GW service, apply the following example configuration:
HeNB-GW service, apply the following example configuration:
configure
snmp trap enable ThreshHENBGWHenbSessions target [ target <trap_collector>]
snmp trap enable ThreshHENBGWPagingMessages target <trap_collector>]
snmp trap enable ThreshHENBGWUeSessions target <trap_collector>]
snmp trap { enable | suppress} HenbgwAccessServiceStart [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwAccessServiceStop [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAllAssocDown [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAllAssocDownClear [ target
<trap_collector>]
<trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAssocDown [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwMMESCTPAssocUp [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwNetworkServiceStart [ target <trap_collector>]
snmp trap { enable | suppress} HenbgwNetworkServiceStop [ target <trap_collector>]
Notes:
<
trap_collector
> is then ame of the 1st trap target. It is a string of size 1 to 31.
There are several additional SNMP Traps which can be configured. Refer Global Configuration Mode chapter of
the Command Line Interface Reference for more information.
For more information on SNMP Traps, refer System SNMP-MIB Reference.
Repeat this configuration as needed for additional traps.