Cisco Cisco Aironet 350 Wireless LAN Client Adapter Release Notes
3
Release Notes for Cisco Aironet PCM/LMC/PCI Client Adapter Firmware, Version 4.25.30
OL-2411-01
Upgrading to a New Firmware Release
If your clients and infrastructure devices do not have matching 802.1X protocol drafts, upgrade the
firmware in these devices to versions with the same draft number. However, if your access points or
bridges are using firmware version 11.06 or later, you can use their Authenticator Configuration page to
select the draft of the 802.1X protocol that they should use. To set the draft for your access points or
bridges, follow the instructions in the Release Notes for Cisco Aironet Access Points for firmware
version 11.06 or greater. You can access these Release Notes at the following URL:
firmware in these devices to versions with the same draft number. However, if your access points or
bridges are using firmware version 11.06 or later, you can use their Authenticator Configuration page to
select the draft of the 802.1X protocol that they should use. To set the draft for your access points or
bridges, follow the instructions in the Release Notes for Cisco Aironet Access Points for firmware
version 11.06 or greater. You can access these Release Notes at the following URL:
Upgrading to a New Firmware Release
This section describes how to upgrade to firmware release 4.25.30.
Determining the Firmware Version
To determine the firmware version that your client adapter is currently using, follow the instructions
below for your operating system.
below for your operating system.
In Windows 95, 98, NT, 2000, Me, or XP
Open ACU; then click the Status icon or select Status from the Commands drop-down menu. The
firmware version is displayed in the Status screen.
firmware version is displayed in the Status screen.
In Linux
Open ACU; then select Status from the Commands drop-down menu. The firmware version is displayed
in the Status screen.
in the Status screen.
In Mac OS
On Mac OS 9.x, open the Macintosh client utility; then select Status from the File drop-down menu and
the Link Status tab. The firmware version is displayed in the Status screen.
the Link Status tab. The firmware version is displayed in the Status screen.
On Mac OS X, click the Status tab on the Advanced Properties screen. The firmware version is displayed
in the Status screen.
in the Status screen.
In Windows CE
Select Start > Programs > Cisco > Load New Firmware. The firmware version is displayed in the
Select New Firmware screen.
Select New Firmware screen.