Cisco Cisco Aironet 350 Wireless LAN Client Adapter Release Notes

Release Notes for Cisco Aironet 350 and CB20A Client Adapter Install Wizard 1.7.01 for Windows

OL-8882-01

Installing or Upgrading Client Adapter Software

Supporting Documentation

The Cisco Aironet 350 and CB20A Wireless LAN Client Adapters Installation and Configuration Guide
for Windows (part number OL-1394-10) provides detailed installation, configuration, and
troubleshooting information for Install Wizard 1.7.01 and its software components:

http://www.cisco.com/en/US/products/hw/wireless/ps4555/products_installation_and_configuration_g
uide_book09186a00804851b8.html

Installing or Upgrading Client Adapter Software

Follow these steps to use Install Wizard 1.7.01 to install or upgrade client adapter software on a computer
running Windows 2000 or XP.

Note

Install Wizard 1.7.01 and its software components are not supported for use with Windows 95, 98, 98
SE, NT, and Me.

Note

You do not need to uninstall any previous versions of Cisco Aironet client adapter software (firmware,
drivers, or utilities) or previous versions of the Install Wizard prior to installing Install Wizard 1.7.01.

Step 1

Use your computer’s web browser to access the following URL:

http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless

Step 2

Click Wireless LAN Access.

Step 3

Click Cisco Wireless LAN Client Adapters.

Step 4

Click Cisco Aironet Wireless LAN Client Adapters.

Step 5

Click Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter, Cisco Aironet 350 Wireless LAN
Client Adapter, or Cisco Aironet 5 GHz 54 Mbps Wireless LAN Client Adapter (CB20A).

Step 6

Click Aironet Client Installation Wizard (Firmware, Driver, Utility).

Step 7

Click Windows 2000 or Windows XP.

Step 8

Click 1.7.01.

Step 9

Click the executable file (*.exe) that appears on your screen.

Step 10

Click Download.

Step 11

Read the software download rules and click Agree.

Step 12

Save the file to your computer’s hard drive.

Step 13

Insert the client adapter into your computer if it is not already inserted.

Caution

Do not eject your client adapter at any time during the installation process, including during the reboot.

Step 14

If a driver is not currently installed for your client adapter, the Found New Hardware Wizard screen
appears. Click Cancel.