Cisco Cisco ASR 5000 Technical Manual
of congestion control.
Congestion Control Before Activation
[local]st40−sim# show congestion−control configuration | more
Congestion−control: disabled
...................
Congestion Control After Activation
[local]st40−sim# configure
[local]st40−sim(config)# congestion−control
[local]st40−sim(config)# end
[local]st40−sim# show congestion−control configuration | more
Congestion−control: enabled
............
Congestion Control After Overload Disconnect Activation
[local]st40−sim# configure
[local]st40−sim(config)# congestion−control overload−disconnect
[local]st40−sim(config)# end
[local]st40−sim# show congestion−control configuration | more
Congestion−control: enabled
............
Overload−disconnect: enabled
Overload−disconnect threshold parameters
license utilization: 80%
max−session−per−service utilization: 80%
tolerance: 10%
session disconnect percent: 5%
iterations−per−stage: 8
............
Congestion Control After Activation of Policies Other Than SGSN and MME
The configuration of the congestion−control policy <service−name> action <action> parameter changes the
value of the congestion control policy section, as per the configuration. Here is one example configuration of
an action drop for the ggsn−service:
value of the congestion control policy section, as per the configuration. Here is one example configuration of
an action drop for the ggsn−service:
[local]st40−sim(config)# congestion−control policy ggsn−service action drop
[local]st40−sim(config)# end
[local]st40−sim# show congestion−control configuration | more
Congestion−control: enabled
............
Congestion−control Policy
pdsn−service: none
hsgw−service: none
ha−service: none
ggsn−service: drop
closedrp−service: none
.............
Congestion Control Threshold for Major and Minor Profiles
This section describes the congestion control threshold configuration verification for the major and minor
profiles. The critical profile already has some default values, which can be changed as required, but the major
profiles. The critical profile already has some default values, which can be changed as required, but the major