Cisco Cisco WAP200E Wireless-G Exterior Access Point - PoE Maintenance Manual

This  shows  the  Access  Point’s  Subnet 

Mask.

To  update  the  status  information,  click  the  Refresh 
button. Help information is available on the right side of 
the screen.

The  Wireless  screen  displays  the  Access  Point’s  current 
status information for the wireless network(s).

Status > Wireless

The  Access  Point’s  wireless  network  mode  is 

displayed here.

The MAC Addresses of the Access 

Point’s wireless interfaces are displayed here.

The  Access  Point’s  SSIDs  that  have  been 

configured are displayed here.

The Access Point’s Channel setting for the SSID 

is shown here.

The VLAN Trunk Status is displayed here.

The  priority  setting  status  is  displayed 

here.

To  update  the  status  information,  click  the  Refresh 
button. Help information is available on the right side of 
the screen.

The  System  Performance  screen  displays  the  Access 
Point’s status information for its current settings and data 
transmissions.

Status > System Performance

This indicates that the statistics are for the wired 

network, the LAN.

The Access Point’s local IP address is displayed 

here.

This shows the MAC Address of the Access 

Point’s wired interface.

This  shows  the  status  of  the  Access  Point’s 

connection for the wired network.

This  shows  the  number  of  packets 

received.

This shows the number of packets sent.

This  shows  the  number  of  bytes 

received.

This shows the number of bytes sent.

This shows the number of error 

packets received.

This  shows  the  number  of 

packets being dropped after they were received.