Cisco Cisco WAP150 Wireless-AC N Dual Radio Access Point with PoE Installation Guide
10
Cisco WAP150 Quick Start Guide
Rebooting the Cisco WAP150 or Resetting
to Factory Defaults
to Factory Defaults
To reboot your Cisco WAP150:
• If the Cisco WAP150 uses a power adapter, with the power on, use the
POWER button to reboot the device. The POWER button only functions
when the Cisco WAP150 uses a power adapter.
when the Cisco WAP150 uses a power adapter.
• If the power supply is PoE, unplug your Ethernet connection for three
seconds and plug it back in.
• With the power on, press the RESET button with an opened paper clip
for less than 10 seconds, or until the lights go off.
–
When all the lights go off, release the RESET button.
–
Release the RESET button as soon as the lights go off, or you will
restore the Cisco WAP150 to factory default settings and lose your
configurations.
restore the Cisco WAP150 to factory default settings and lose your
configurations.
To reset the Cisco WAP150 to factory default settings:
• With the power on, press and hold the RESET button with an opened
paper clip for more than 10 seconds.
–
All of the lights will go off.
–
Release the RESET button when the power light turns on.
8