Cisco Cisco Aironet 1200 Access Point Release Notes

For the Console/Telnet settings, only the Enable and Disable settings are migrated.

For the HTTP configuration settings, only the HTTP port and the Enable or Disable settings are 
migrated.

VLANs (except the Native VLAN) are migrated only when they are associated with an SSID.

Only MAC based filter settings with SSIDs associated to a VLAN and with MAC authentication 
enabled are migrated. The log file contains a list of the MAC filters that are not migrated.

The Alert settings in filters are not migrated.

AAA server timeout settings range from 1 to 1000. If the configured setting is greater than 1000, the 
migrated setting is 1000. If the configured setting is less than 1, the migrated setting is 1.

AAA server retransmission settings range from 1 to 100. If the configured setting is greater than 100, 
the migrated setting is 100. If the configured setting is less than 1, the migrated setting is 1.

Separate EAP and Non-EAP accounting server settings are not migrated. After an accounting server 
is enabled, all the users are configured to use that server.

System names containing a space are migrated with an underscore (_) replacing the space. For 
example; a name of AP 1200 is migrated as AP_1200.

LEAP usernames with a space are not migrated.

The following Ethernet parameters are not migrated:

Optimize Network for maximum multicast packets per second, loss of backbone connectivity 
timeout value, and maximum multicast packets per second.

The following Boot Server configuration parameters are not migrated:

DHCP Multiple-Offer Timeout

DHCP Requested Lease Duration

DHCP Minimum Lease Duration

DHCP Client Identifier Value

The FTP and TFTP configuration parameters are not migrated.

The following AAA Server configuration parameters are not migrated:

Port configuration settings for TACACS server

802.1X Protocol Version (for EAP authentication)

Update Delay per Server for the Accounting Server

The following configuration settings are not migrated:

Rogue AP Alert Timeout

Unknown Class Timeout

Multicast Addresses Timeout

Infrastructure Hosts, Client Stations, and Repeater Timeout

When both port and protocol filters are applied on an interface

Default multicast address filtering for an interface

Maximum RTS Retries settings range from 1 to 128. If the configured setting is greater than 128, 
the migrated setting is 128. 

Maximum Data Retries settings range from 1 to 128. If the configured setting is greater than 128, 
the migrated setting is 128.