Cisco Cisco WAP571 Wireless-AC N Premium Dual Radio Access Point with PoE Maintenance Manual

Groups

Cisco WAP571/E Administration Guide

150

•

authNoPriv

•

authPriv

Access to Management Information Bases (MIBs) for each group is controlled by 
associating a MIB view to a group for read or write access, separately.

By default, the AP has two groups:

•

RO—A read-only group using authentication and data encryption. Users in 
this group use an MD5 key/password for authentication and a DES key/
password for encryption. Both the MD5 and DES key/passwords must be 
defined. By default, users of this group have read access to the default all 
MIB view. 

•

RW—A read/write group using authentication and data encryption. Users in 
this group use an MD5 key/password for authentication and a DES key/
password for encryption. Both the MD5 and DES key/passwords must be 
defined. By default, users of this group have read and write access to the 
default all MIB view.

The default groups RO and RW cannot be deleted.

The AP supports a maximum of eight groups.

To add and configure an SNMP group:

Select SNMP > Groups in the navigation pane.

Click Add to create a new row in the SNMPv3 Groups table.

Check the box for the new group and click Edit.

Configure the parameters:

•

Group Name—A name that identifies the group. The default group names 
are RO and RW. 

Group names can contain up to 32 alphanumeric characters.

•

Security Level—Sets the security level for the group, which can be one of 
these options:

-

noAuthentication-noPrivacy—No authentication and no data 
encryption (no security).