Cisco Cisco Aironet 1200 Access Point Release Notes

The following caveats are resolved in VxWorks firmware version 12.03T:

CSCdx81372—The access point accepts VxWorks version 11.56-generated ini file.

CSCdy10787—The access point no longer aborts configurations containing an unknown MIB 
variable.

CSCdy80821—The access point no longer continuously reboots after applying a configuration 
template.

CSCdz00540—Share authentication now works when TKIP is enabled.

CSCdz23591—The access point no longer stops sending multicast packets, thereby eliminating 
configuration distribution problems.

CSCdz24966—Broadcast key rotation operates correctly with current 350 client.

CSCdz32270—DHCP client ID and channel information is no longer distributed to all access points.

CSCdz34132—Aironet Client Utility (ACU) now displays IP address with EAP-TLS instead of 
MAC address.

CSCdz38726—Eliminated possible confusion for exiting console.

CSCdz41180—The Clear Alert Statistics button in the Event Handling Setup page is correctly 
documented.

CSCdz47442—IP Setup Utility (IPSU) returns incorrect IP addresses in large networks.

This caveat is closed. Based on testing, the problem occurs only with old VxWorks or IOS software 
releases. If a network has mixed access points with old and new software releases, the problem may 
exist. Upgrading all access points to a new software release eliminates the problem.

CSCdz48575—The access point now defaults to No Action on loss of Ethernet.

CSCdz49470—The access point no longer sends a DNS not available error.

CSCdz55839—DHCP no longer fails after first broadcast WEP key rotation.

CSCdz68197—The 802.11a radio no longer fails when rebooted.

CSCdz71408—The radio returns to an operational state after being shut down.

CSCea09515—VxWorks access points now provide three EAP retries.

CSCea17203—Memory leak issue when sending an LLC packet is resolved.

CSCea21135—RADIUS-based VLAN clients are now able to communicate to clients on the same 
VLAN.

CSCea36554—Access point no longer reboots on large file transfers.

CSCea41867—Quality of Service for Policy Group parameter now works regardless of QBSS 
setting.

CSCea45758—Documentation describing EAP authentication has been amplified and corrected.

CSCea45776—Documentation describing dual radio operation in repeater mode has been amplified.

CSCea66109—Access points with MAC authentication set no longer drop packets when a client 
roams.

CSCeb18758—Documentation now provides better explanation of workgroup bridge limitation in 
network infrastructure mode.