Cisco Cisco Catalyst Blade Switch 3020 for HP Release Notes

© 2006 Cisco Systems, Inc. All rights reserved.

Revised June 10, 2008

Cisco IOS Release 12.2(25)SEF1 and later runs on the Cisco Catalyst Blade Switch 3020 for HP, also 
referred to as the switch. 

These release notes include important information about Cisco IOS Release 12.2(25)SEF1 and later and 
any limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct 
for your switch:

If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.

If your switch is on, use the show version privileged EXEC command. See the 

If you are upgrading to a new release, see the software upgrade filename for the software version. 
See the 

For the complete list of Cisco Catalyst Blade Switch 3020 for HP documentation, see the 

You can download the switch software from this site (registered Cisco.com users with a login password):

This software release is part of a special release of Cisco IOS software that is not released on the same 
8-week maintenance cycle that is used for other platforms. As maintenance releases and future software 
releases become available, they will be posted to Cisco.com in the Cisco IOS software area. 

Cisco IOS Release 12.2(25)SEF1 and later is based on Cisco IOS Release 12.2(25)S. Open caveats in 
Cisco IOS Release 12.2(25)S also affect Cisco IOS Release 12.2(25)SEF1 and later, unless they are 
listed in the Cisco IOS Release 12.2(25)SEF1 and later resolved caveats list. The list of open caveats in 
Cisco IOS Release 12.2(25)S is available at this URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/122srn.htm#wp2367913