Cisco Cisco Catalyst Blade Switch 3020 for HP

Restart the switch to enable the IP services feature set.

Use the show version command to display the software license information after restarting the switch:

Switch# show version

<output truncated>

License Level: ipservices   Type: Permanent

Next reboot license Level: ipservices

<output truncated>

These documents provide complete information about the switches and are available from this 
Cisco.com site:

Before installing, configuring, or upgrading a switch, see these documents:

For initial configuration information, see the “Using Express Setup” section in the getting started 
guide or the “Configuring the Switch with the CLI-Based Setup Program” appendix in the hardware 
installation guide. 

For device manager requirements, see the “System Requirements” section in the release notes (not 
orderable but available on Cisco.com).

For Network Assistant requirements, see the Getting Started with Cisco Network Assistant (not 
orderable but available on Cisco.com).

For cluster requirements, see the Release Notes for Cisco Network Assistant (not orderable but 
available on Cisco.com).

For upgrading information, see the “Downloading Software” section in the release notes. 

You can order printed copies of documents with a DOC-xxxxxx= number from the Cisco.com sites and 
from the telephone numbers listed in the URL referenced in the 

.

Cisco License Manager

Cisco License Manager online help

Cisco Catalyst Blade Switch 3120 for HP

Release Notes for the Cisco Catalyst Blade Switch 3120 for HP (not orderable but available on 
Cisco.com)

Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide (not orderable but 
available on Cisco.com)

Cisco Catalyst Blade Switch 3120 for HP Command Reference (not orderable but available on 
Cisco.com)