Cisco Cisco Prime IP Express 8.3 Technical References
scope selection tags. The DHCP server looks up these properties
to determine how it should process a host request for an IP
address.
If you have common client attributes to configure, such as
selection criteria, use the client-class so that multiple client
configurations can reference the attributes.
You can specify the client by using the MAC address or some
other unique client identifier related to the client-lookup-id
that is specified in the client's associated client-class.
to determine how it should process a host request for an IP
address.
If you have common client attributes to configure, such as
selection criteria, use the client-class so that multiple client
configurations can reference the attributes.
You can specify the client by using the MAC address or some
other unique client identifier related to the client-lookup-id
that is specified in the client's associated client-class.
A sample Ethernet MAC address might be 1,6,00:a0:24:2e:9c:20
client name create [attribute=value...]
client default create [attribute=value...]
Creates the client identifier as a MAC address or the word
default (and optionally defines its attributes). The default
client configuration applies to all clients that do not have
an explicit configuration. If an entry for the client already
exists, the command overwrites it.
client default create [attribute=value...]
Creates the client identifier as a MAC address or the word
default (and optionally defines its attributes). The default
client configuration applies to all clients that do not have
an explicit configuration. If an entry for the client already
exists, the command overwrites it.
If using a MAC address, it should be in the form hardware,
length, address (without spaces and including the commas):
length, address (without spaces and including the commas):
hardware
Usually 1 (Ethernet) or 6 (Token Ring), but can be any number
Usually 1 (Ethernet) or 6 (Token Ring), but can be any number
from 1 through 255.
length
Octets in the MAC address (usually 6, but can be any number
Octets in the MAC address (usually 6, but can be any number
from 1 through 16).
address
MAC address itself, with octets separated by colons, and each
MAC address itself, with octets separated by colons, and each
octet having a two-character hex value from 00 through FF
(not case-sensitive).
Examples
nrcmd> client 1,6,00:d0:ba:d3:bd:3b create client-class-name=external
Status
See Also
Attributes
(exclude=1, deprecated-one-shot=2, deprecated-use-release-grace-period=3, none=32)
Describes the action the DHCP server takes for this client.
1 exclude - causes the server to ignore all
communication from this client.
2 deprecated-one-shot - now deprecated.
3 deprecated-use-release-grace-period - now deprecated.
32 none
If you specify the exclude action in the default client
entry, then any client not specifically registered through
the client command cannot communicate with the server.
Note: The deprecated flags (2,3) are now available through
the policy command attributes inhibit-all-renews and
release-grace-period.
1 exclude - causes the server to ignore all
communication from this client.
2 deprecated-one-shot - now deprecated.
3 deprecated-use-release-grace-period - now deprecated.
32 none
If you specify the exclude action in the default client
entry, then any client not specifically registered through
the client command cannot communicate with the server.
Note: The deprecated flags (2,3) are now available through
the policy command attributes inhibit-all-renews and
release-grace-period.
Lists attribute-value pairs that are added to the environment
dictionary whenever this client-class is associated with an
incoming DHCP request. You can use these attribute-value pairs
to configure extensions or expressions without having to rewrite
the executable code in the extension or expression.
The string must have the format:
"attribute1=value1,attribute2=value2, ... ,attributen=valuen"
dictionary whenever this client-class is associated with an
incoming DHCP request. You can use these attribute-value pairs
to configure extensions or expressions without having to rewrite
the executable code in the extension or expression.
The string must have the format:
"attribute1=value1,attribute2=value2, ... ,attributen=valuen"