Cisco Cisco Prime IP Express 8.3 Technical References
See Also
import
import - loads server configuration information from a file
Synopsis
import keys <file>
import leases <file>
import named.boot <file>
import named.conf <file>
import option-set <file>
import leases <file>
import named.boot <file>
import named.conf <file>
import option-set <file>
Description
The import command lets you import lease information into the
DHCP server configuration or BIND configuration information
into the DNS server configuration.
import leases <file>
Before you can import leases, you need to perform several
configuration steps:
1. Configure scopes in the DHCP server for the leases
that are going to be imported. (see the scope command.)
2. If the host names for the leases are going to be dynamically
entered into DNS as part of the import, configure zones in the
DNS server to allow dynamic updates. (see the zone command)
3. Set the DHCP server to import mode so that it will not
respond to other lease requests during the lease importing.
(see the dhcp command)
After the leases have been imported, take the DHCP server out of
import mode so that it will respond to other lease requests.
import named.boot <file>
Imports an existing BIND 4.x.x configuration into DNS by parsing
the BIND named.boot file and reading the zone data from the
associated BIND zone files.
DHCP server configuration or BIND configuration information
into the DNS server configuration.
import leases <file>
Before you can import leases, you need to perform several
configuration steps:
1. Configure scopes in the DHCP server for the leases
that are going to be imported. (see the scope command.)
2. If the host names for the leases are going to be dynamically
entered into DNS as part of the import, configure zones in the
DNS server to allow dynamic updates. (see the zone command)
3. Set the DHCP server to import mode so that it will not
respond to other lease requests during the lease importing.
(see the dhcp command)
After the leases have been imported, take the DHCP server out of
import mode so that it will respond to other lease requests.
import named.boot <file>
Imports an existing BIND 4.x.x configuration into DNS by parsing
the BIND named.boot file and reading the zone data from the
associated BIND zone files.
import named.conf <file> <protected | unprotected>
Imports an existing BIND 8 or BIND 9 configuration into DNS
by parsing the BIND named.conf file and reading the zone data
from the associated BIND zone files. If no name-protection
option is specified, the default is protected.
Imports an existing BIND 8 or BIND 9 configuration into DNS
by parsing the BIND named.conf file and reading the zone data
from the associated BIND zone files. If no name-protection
option is specified, the default is protected.
import keys
Imports TSIG keys into the Cluster configuration by reading
in key data from a file. This file can be generated by running
the key generator utility (cnr_keygen). The keys are written in
BIND syntax and therefore can also be copied from a valid BIND
configuration.
Imports TSIG keys into the Cluster configuration by reading
in key data from a file. This file can be generated by running
the key generator utility (cnr_keygen). The keys are written in
BIND syntax and therefore can also be copied from a valid BIND
configuration.
import option-set
Imports an option-set from specified file. Compatible files can
be generated using the 'export option-set' command.
Imports an option-set from specified file. Compatible files can
be generated using the 'export option-set' command.
Examples
Status
See Also