Cisco Cisco Prime Network Registrar 8.2 Troubleshooting Guide
Introduction
This document describes the compatibility of Cisco Prime Network Registrar IP Address
Management (IPAM) 8.1.2/8.1.3 with Cisco Prime Network Registrar 8.2. It describes the changes
which must be made when you install the IPAM Executive/Remote agents in order to enable IPAM
8.1.2/8.1.3 to work with Cisco Prime Network Registrar 8.2.
This document also identifies the Cisco Prime Network Registrar 8.2 features which can be used
with IPAM 8.1.2/8.1.3.
Management (IPAM) 8.1.2/8.1.3 with Cisco Prime Network Registrar 8.2. It describes the changes
which must be made when you install the IPAM Executive/Remote agents in order to enable IPAM
8.1.2/8.1.3 to work with Cisco Prime Network Registrar 8.2.
This document also identifies the Cisco Prime Network Registrar 8.2 features which can be used
with IPAM 8.1.2/8.1.3.
Document ID: 117365
Updated: Sep 08, 2015
Contributed by Cisco Engineers.
Related Products
●
Contents
Before You BeginRequirementsIPAM 8.1.2 with Cisco Prime Network Registrar 8.2 - SetupNew Features in Cisco Prime Network Registrar 8.2Limitations of Prime IPAM 8.1.2/8.1.3 when used with Prime
Network Registrar 8.2Unsupported Cisco Prime Network Registrar 8.2 FeaturesDeprecated Attributes Not to Be Configured in IPAM 8.1.2/8.1.3DNS Server Configuration PageEdit Forward/Reverse Zone Configuration PageEdit Secondary Zone Configuration PageHA DNS Pair Configuration PageDHCP Server PageDNS Deployment TaskSummaryRelated InformationRelated Cisco Support Community Discussions
Before You Begin
Requirements