Cisco Cisco Prime Network Registrar 8.3 Troubleshooting Guide
Cisco Prime Network Registrar IPAM 8.3 Disaster Recovery Guide
19
3.3.2.2 Start all IPAM services on the DR Executive
3.3.2.2.1 Linux
Run the incontrol script to start all services on the DR Executive:
> $INCHOME/etc/incontrol start
> $INCHOME/etc/incontrol start
3.3.3 Return to Normal
This section describes the procedure necessary to return to normal
operation where the Production Executive is online, and the DR Executive
is offline.
is offline.
3.3.3.1 Take the DR Executive offline
Disable the IP connectivity of the DR Executive by either physically
disconnecting it from the network, or by disabling the switch port to
which it is connected.
which it is connected.
3.3.3.2 Bring the Production Executive online
Enable the IP connectivity of the Production Executive by either
physically connecting it to the network, or by enabling the switch port
to which it is connected.
to which it is connected.
3.3.3.3 Start IPAM Services on Production Executive
3.3.3.3.1 Linux
Run the incontrol script to start all services on the Production Executive:
> $INCHOME/etc/incontrol start
> $INCHOME/etc/incontrol start