Cisco Cisco Broadband Access Center for Cable 4.0 Maintenance Manual
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Supported Syslogs and Traps in
Cisco Broadband Access Center 4.0 and 4.0.1
Cisco Broadband Access Center 4.0 and 4.0.1
Revised: March 31, 2010, OL-22203-01
This document provides the detailed information about the traps and syslogs supported in
Cisco BAC 4.0 and 4.0.1 releases.
Cisco BAC 4.0 and 4.0.1 releases.
Contents
This document includes the following sections:
•
•
–
–
–
–
•
•
SNMP Traps
Cisco BAC provides basic SNMP v2-based monitoring of the RDU and DPE servers. The Cisco BAC
SNMP agents support SNMP informs and traps, collectively called notifications.
SNMP agents support SNMP informs and traps, collectively called notifications.
You can configure an SNMP agent on the DPE by using snmp-server CLI commands. For additional
information of the commands, see
information of the commands, see
You can configure an SNMP agent on the RDU by using the snmpAgentCfgutil.sh tool. For information
about configuring SNMP agent on the RDU using snmpAgentCfgutil.sh tool, see
about configuring SNMP agent on the RDU using snmpAgentCfgutil.sh tool, see