Cisco Cisco ONS 15454 M6 Multiservice Transport Platform (MSTP) Technical Manual
ONS 15454 M6 UDC Ports on ECU Configuration
Example
Example
Document ID: 118599
Contributed by Sunil Poonia, Cisco TAC Engineer.
Nov 14, 2014
Nov 14, 2014
Contents
Introduction
Prerequisites
Requirements
Component Used
Background Information
Dense Wavelength Division Multiplexing (DWDM) Setup
Application
Example 1
Example 2
Example 3
Limitation
Configuration
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Component Used
Background Information
Dense Wavelength Division Multiplexing (DWDM) Setup
Application
Example 1
Example 2
Example 3
Limitation
Configuration
Verify
Troubleshoot
Related Information
Introduction
This document explains the use of User Data Channel (UDC) ports, which are available on the External
Connection Unit (ECU) of the Cisco ONS 15454 M6.
Connection Unit (ECU) of the Cisco ONS 15454 M6.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics
Multi−Service Transport Platform (MSTP) systems, concepts, and hardware
•
Cisco Transport Controller (CTC)
•
Component Used
The information in this document is based on these hardware and software versions:
ONS 15454 M6, ONS 15454 M6 ECU, and ONS 15454 M TNC
•
Optical card combining/splitting Optical Supervisory Channel (OSC)
•
CTC
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
devices used in this document started with a cleared (default) configuration. If your network is live, make sure