Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP) Installation Guide

Page of 16
Corporate Headquarters:
© 2005-2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the TXP_MR_10E_C and 
TXP_MR_10E_L Cards in the Cisco ONS 15454 
SONET/SDH
Note
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms 
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. 
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's 
path protection feature, which may be used in any topological network configuration. Cisco does not 
recommend using its path protection feature in any particular topological network configuration.
Product Names: 15454-10EMRC
 
TXP, 15454-10EMRL TXP
This document provides a card description, specifications, and installation procedure for the 
MXP_MR_10E_C and MXP_MR_10E_L cards. These cards are compatible with the ONS 15454 
SONET (ANSI) and the ONS 15454 SDH (ETSI) shelf assemblies. As appropriate, use this document 
in conjunction with the Cisco ONS 15454 DWDM Procedure Guide, the Cisco ONS 15454 DWDM 
Reference Manual, 
and the Cisco ONS 15454 DWDM Troubleshooting Guide.
This document contains the following sections: