Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
Line Utilization numbers express the average of ingress and egress traffic as a percentage of capacity.
Note
Payload History Window
The Payload PM History window in the card view Performance > Payload > History tab lists past statistics for the previous time
intervals. This tab cannot be viewed unless the appropriate PPM port type is provisioned. For PPM provisioning procedures, refer to
the Cisco ONS 15454 DWDM Line Card Configuration Guide . Depending on the selected time interval, the History window displays
the statistics for each port for the number of previous time intervals as shown in the following table.
intervals. This tab cannot be viewed unless the appropriate PPM port type is provisioned. For PPM provisioning procedures, refer to
the Cisco ONS 15454 DWDM Line Card Configuration Guide . Depending on the selected time interval, the History window displays
the statistics for each port for the number of previous time intervals as shown in the following table.
Table 18: History Statistics per Time Interval
Number of Intervals Displayed
Time Interval
32 (current and previous)
15 minutes
2 (current and previous)
1 day (24 hours)
OTN PM Window
The OTN tab has an ITU-T G.709 PM subtab and an FEC PM subtab. Both subtabs provide buttons to change the statistical values
shown in the Performance tab. The Refresh button manually refreshes statistics. Auto-Refresh sets a time interval at which automatic
refresh occurs. The Baseline button resets the displayed statistics values to zero. The Statistics window also has a Clear button. The
Clear button sets the values on the card to zero. All counters on the card are cleared. The Help button activates context sensitive help.
For more information about provisioning optical transport network (OTN) settings, refer to the Cisco ONS 15454 DWDM Line Card
Configuration Guide .
shown in the Performance tab. The Refresh button manually refreshes statistics. Auto-Refresh sets a time interval at which automatic
refresh occurs. The Baseline button resets the displayed statistics values to zero. The Statistics window also has a Clear button. The
Clear button sets the values on the card to zero. All counters on the card are cleared. The Help button activates context sensitive help.
For more information about provisioning optical transport network (OTN) settings, refer to the Cisco ONS 15454 DWDM Line Card
Configuration Guide .
The OTN PM provisioning options for all transponder, muxponder, Xponder (GE_XP, 10GE_XP, GE_XPE, 10GE_XPE), and
ADM-10G cards are shown in the following table. The options selected in the Provisioning tab affects the parameters displayed in
the Performance > OTN PM tab.
ADM-10G cards are shown in the following table. The options selected in the Provisioning tab affects the parameters displayed in
the Performance > OTN PM tab.
Table 19: Transponder, Muxponder, and Xponder PM Provisioning Options
OTN Provisioning
Card
—
MXPP_MR_2.5G
G.709
FEC
FEC Thresholds
MXP_2.5G_10E
G.709
FEC
FEC Thresholds
MXP_2.5G_10E_C
25