Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
Procedure
Step 1
In node view (single-shelf mode), or shelf view (multishelf mode), double-click the TXP or MXP card where you want
to view OTN PM parameters. The card view appears.
to view OTN PM parameters. The card view appears.
Step 2
Click the Performance > OTN PM > ITU-T G.709 PM tabs.
Step 3
View the PM parameter names that appear in the Param column. The PM parameter values appear in the Curr (current)
and Prev-n (previous) columns.
and Prev-n (previous) columns.
Step 4
Click the FEC PM tab.
Step 5
View the PM parameter names that appear in the Param column. The PM parameter values appear in the Curr (current)
and Prev-n (previous) columns.
and Prev-n (previous) columns.
Step 6
Return to your originating procedure (NTP).
DLP-G149 View Payload Statistics PM Parameters
This task enables you to view current statistical PM counts on
an MXP_MR_2.5G or MXPP_MR_2.5G, WSE, MR-MXP,
CFP-LC, 100G-LC-C, 100GS-CK-LC, 200G-CK-LC,
400G-XP-LC, 10x10G-LC, or 100G-CK-C card and port to
detect possible performance problems.
an MXP_MR_2.5G or MXPP_MR_2.5G, WSE, MR-MXP,
CFP-LC, 100G-LC-C, 100GS-CK-LC, 200G-CK-LC,
400G-XP-LC, 10x10G-LC, or 100G-CK-C card and port to
detect possible performance problems.
The statistical PM counts of the CFP-LC card can be
viewed on the virtual port of the peer 100G-LC-C
card.
viewed on the virtual port of the peer 100G-LC-C
card.
Note
Purpose
None
Tools/Equipment
"DLP-G46 Log into CTC" task at
document.
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Security Level
Security Level
89