Cisco Cisco ONS 15454 M2 Multiservice Transport Platform (MSTP)
NTP-G345 Viewing Ethernet Statistical PM Counts
This procedure enables you to view current and historical statistical PM counts for an interface
on the Cisco CRS router.
on the Cisco CRS router.
Purpose
None
Tools/Equipment
Prerequisite Procedures
As needed
Required/As Needed
Onsite or remote
Onsite/Remote
Provisioning or higher
Security Level
This procedure applies to Cisco CRS routers 6.x.
Note
Procedure
Step 1
From the View menu, choose Go to Network View to view the circuits for an entire network.
Step 2
Double-click the Cisco CRS router node in the circuit.
Step 3
Choose an interface on the Cisco CRS router.
Step 4
Click the Ethernet Stats tab.
The Current tab is displayed by default.
The Current tab is displayed by default.
Step 5
To view the current ethernet statistics, perform the following steps:
a) To change the interval to 1 day, click the 1 day radio button followed by Refresh.
Ethernet statistics for the interface appear. The interval is set to 15 min by default.
b) To reset the statistics in the Curr column to zero for the 15 min and 1 day intervals respectively, click Clear.
Step 6
To view the historical ethernet statistics, perform the following steps:
a) Click the History tab.
b) To change the interval to 1 day, click the 1 day radio button followed by Refresh.
b) To change the interval to 1 day, click the 1 day radio button followed by Refresh.
Ethernet statistics for the interface appear in the Prev (previous) and Prev-n (previous) columns. The interval is set to
15 min by default.
15 min by default.
Stop. You have completed this procedure.
95