Cisco Cisco Broadband Access Center Telco Wireless 3.8
C-37
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
Log System Management Commands
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug dpe event-manager
%OK
debug dpe exceptions
Usage Guidelines
This command enables or disables the debugging of DPE exceptions, which involves logging full stack
traces for exceptions occurring during system operation. When unusual situations occur, where the
system is apparently corrupt or behaving very badly, running this command can reveal very valuable
information for Cisco TAC support.
traces for exceptions occurring during system operation. When unusual situations occur, where the
system is apparently corrupt or behaving very badly, running this command can reveal very valuable
information for Cisco TAC support.
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug dpe exceptions
%OK
debug dpe framework
Usage Guidelines
This command enables the debugging of the DPE framework, which involves logging information about
the DPE server’s underlying framework. This underlying infrastructure provides for all of the various
servers in BAC.
the DPE server’s underlying framework. This underlying infrastructure provides for all of the various
servers in BAC.
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug dpe framework
%OK
debug dpe messaging
Usage Guidelines
This command enables the debugging of DPE messaging, which involves logging details about the DPEs
messaging subsystem. This subsystem is used primarily for communication between the DPE and the
RDU.
messaging subsystem. This subsystem is used primarily for communication between the DPE and the
RDU.
Examples
This command requires no special syntax, and you enter it as shown in this example:
dpe# debug dpe messaging
%OK