Cisco Cisco Broadband Access Center Telco Wireless 3.5
1-10
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Chapter 1 Broadband Access Center for Cable Overview
SNMP Agents
DPE Agent CLI
There are several SNMP related CLI commands that are necessary to use the agent. These are described
in the
in the
RDU SNMP Agent
The RDU SNMP agent monitors the RDU process and generates SNMP traps whenever the RDU process
starts or stops.
starts or stops.
Since the RDU is intended to be loaded on an open Solaris device, the RDU SNMP agent will not provide
support for other MIBs like RFC 1213 (MIB II).
support for other MIBs like RFC 1213 (MIB II).
MIBs Supported
The RDU SNMP agent is intended for operation within the Solaris operating system only and, as such,
offers no support for MIB-II. This agent does however, support the CISCO-NMS-APPL-HEALTH-MIB
which defines the Cisco NMS application health status notifications and related objects. These
notifications are sent to the OSS/NMS to inform them about the NMS application status. Status can
include: started, stopped, failed, busy, or any abnormal exit of applications.
offers no support for MIB-II. This agent does however, support the CISCO-NMS-APPL-HEALTH-MIB
which defines the Cisco NMS application health status notifications and related objects. These
notifications are sent to the OSS/NMS to inform them about the NMS application status. Status can
include: started, stopped, failed, busy, or any abnormal exit of applications.
Traps
The RDU SNMP agent generates the traps listed in
ciscoCwApplianceMemoryFull
This trap is generated when memory utilization exceeds a
pre-set threshold. Memory utilization is polled regularly and
this trap is generated when utilization exceeds a pre-set
threshold.
pre-set threshold. Memory utilization is polled regularly and
this trap is generated when utilization exceeds a pre-set
threshold.
Note
This trap is generated as a result of monitoring
resource use.
resource use.
ciscoCwApplianceDiskFull
This trap is generated whenever polling indicates that the
amount of free hard disk space drops below the pre-set
threshold level.
amount of free hard disk space drops below the pre-set
threshold level.
Note
This trap is generated as a result of monitoring
resource use.
resource use.
Table 1-1
DPE SNMP Agent Traps (continued)
Trap
Description