Cisco Cisco Broadband Access Center for Cable 4.2
C-4
Cisco Broadband Access Center for Cable Administrator’s Guide
OL-2445-02
Appendix C Device Provisioning Engine Command Line Interface
System Commands
Examples
These are examples of how to use the enable password command:
Note
In these examples, please note the different password messages that might appear.
Example 1:
dpe# enable password
New enable password:
Retype new enable password:
Password changed successfully.
Results:
These results occur when the password is changed successfully.
Example 2:
dpe# enable password
New enable password:
Retype new enable password:
Sorry, passwords do not match.
Results:
These results occur when the password is not entered consistently.
Example 3:
dpe# enable password cisco
Password changed successfully
Results:
These results occur when the password was successfully changed.
enable
Usage Guidelines
Use the enable command to enter the enabled mode. Viewing system configuration does not require the
enabled mode. However, the enabled mode is required to change the system configuration, state, and
data.
enabled mode. However, the enabled mode is required to change the system configuration, state, and
data.
Examples
This is an example of how to use the enable command:
dpe# enable
Password:
dpe#
Note
Refer to the
for information on setting the password.