Cisco Cisco Prime Network 3.8 Installation Guide
Page 3 of 12
Cisco Prime Network 3.8.0.0.5 VNE Device Package Installation Guide
For example, PrimeNetwork-3.8.xTo3.9.x-DP1207.tar – indicates the device package is released in
July 2012 and is supported on Prime Network 3.8, 3.8.1, and 3.9.
July 2012 and is supported on Prime Network 3.8, 3.8.1, and 3.9.
Note: PrimeNetwork-3.8.xTo3.9.x-DP1206.tar is not supported on Cisco Prime Network 3.8.1
server
server
3 Installation Prerequisites
Before installing the Device Package, make sure of the following:
Prime Network Release
Device package Release
Prime Network 3.8.0.0.5 or later
PrimeNetwork-3.8.xTo3.9.x-DP1206.tar or later
Prime Network 3.8.0.0.4 or earlier
CiscoPrimeNetwork-3.8-DP6.tar or earlier
1. Verify that Cisco Prime Network 3.8.0.0.5 is installed on the server .
2. It is mandatory to install Cisco Prime Network 3.8.0.0.5 or above on Cisco Prime Network server
2. It is mandatory to install Cisco Prime Network 3.8.0.0.5 or above on Cisco Prime Network server
before installing the VNE Device package ( e.g. PrimeNetwork-3.8.xTo3.9.x-DP1206.tar)
Note: PrimeNetwork-3.8.xTo3.9.x-DP1206.tar is not supported on Cisco Prime Network 3.8.1
server
Note: PrimeNetwork-3.8.xTo3.9.x-DP1206.tar is not supported on Cisco Prime Network 3.8.1
server
3. Log into Cisco.com and navigate to
download the Prime Network Cisco VNE Device packages
4. Download and install the 3.8.0.0.5 or the latest Point patch / service patch on
5. If your configuration is using the HA/DR (gateway high availability) solution, in the VERITAS
Cluster Manager Application, uncheck the critical flag from the Cisco ANA gateway resource.
4 Copying the DP File to a Central Location
Create a new directory for the DP and copy the DP file to that new directory:
1.
Create a new directory outside of the Cisco ANA home directory. For example, the following
creates a directory named VNEDP under /export/home/:
creates a directory named VNEDP under /export/home/: