Cisco Cisco Transport Manager 9.0 Release Notes

This section documents supplemental changes that have been made since the initial release of the 
Release Notes for Cisco Transport Manager Release 9.0.

The following NE releases were added to 

, “CTM Supported NE Software Releases”:

Automatically added to CTM when the latest patch or service pack is installed:

ONS 15305 R2.0.4 and R2.0.5

ONS 15305 R2.2.2

ONS 15310 CL R9.0.1

ONS 15310 MA SONET R9.0.1

ONS 15310 MA SDH R9.0.1

ONS 15454 SDH R9.0.1

ONS 15454 SDH R9.0.2

ONS 15454 SONET R9.0.1

ONS 15454 SONET R9.0.2

ONS 15600 SDH R9.0.1

ONS 15600 SONET R9.0.1

Manually added to CTM:

ONS 15305 R2.0.2

Support for SSHv1, FTP, and Telnet access

You can use the CTM GUI to enable or disable SSHv1, FTP, or Telnet access 
to a switch. You can enable or disable this feature by selecting a node in the 
Domain Explorer tree and choosing Configuration > MGX Voice 
Gateway > Configuration Center. In the Node tab, choose the applicable 
options in the SSHv1, FTP, or Telnet field.

Proactive detection of data path failure for 
RPM-XF cards

The RPM-XF card runs a data path check (DPC) on the active and standby 
cards to detect the health of the data path. The results of the RPM-XF data 
path check are communicated to CTM through traps, and the alarms are 
displayed in the Alarm Browser.

Support for AnnexAB

You can enable AnnexAB features by choosing Configuration > MGX Voice 
Gateway > Configuration Center > H.248 tab and selecting the appropriate 
option under the Profile Undotted Notation or Profile Annexab Enabled field.

Support for SMS detection

You can create event mapping with the event type SMS. You can enable this 
feature by choosing Configuration > MGX Voice Gateway > Configuration 
Center > VBD tab and selecting SMS under the Event Index field.