Cisco Cisco Prime Network 3.8 Release Notes
7
Cisco Prime Network 3.8 Release Notes
OL-24477-01
New Features and Enhancements in Prime Network 3.8
Installing an Embedded Database on a Remote IPv6 Server
Due to a third party bug, you are not able to install an embedded database on a remote server whose
listener is configured for IPv6. To work around this problem:
listener is configured for IPv6. To work around this problem:
Step 1
Verify that the remote server supports both IPv4 and IPv6.
Step 2
Install an embedded database on that server.
During installation, select the IPv4 address to listen on.
Step 3
After installation completes, enter the following commands to run a configuration utility:
a.
cd Main/scripts/embedded_db
b.
run add_oracle_listener.pl
While the utility runs, you are asked to specify information, such as a user password. At one point in the
utility, you are asked whether you want to install a database on a remote server.
utility, you are asked whether you want to install a database on a remote server.
Step 4
Answer Yes and enter the IP address of the new database to be supported by the listener.
Note
Limitations apply when using Prime Network Change and Configuration Management in an IPv6
network. For more information, refer to
network. For more information, refer to
.
New Features and Enhancements in Prime Network 3.8
The following topics describe the new features and enhancements in Prime Network 3.8:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
These topics provide information about new support in Prime Network 3.8 for devices, software, and
fault management.
fault management.