Cisco CiscoWorks QoS Policy Manager 4.1 Installation Guide
11
Readme for QoS Policy Manager 4.1.4 on Windows
OL-21865-01
Ports Used by QPM
For 3900 series ISRs, the following command is used in policy-map configuration mode to configure
traffic policing using the committed information rate and peak information rate:
traffic policing using the committed information rate and peak information rate:
police cir
police-rate
[
police-bc
] [pir
pir
] [be
police-be
]
conform-action
action
[exceed-action
action
[violate-action
action
]]
where action is
{transmit
| continue | set-prec-transmit
precedence |
set-dscp-transmit
dscp
|
set-prec-continue
precedence
| set-dscp-continue
dscp
| set-qos-transmit
qos
|
set-qos-continue
qos
| policed-dscp-transmit
dscp
| set-clp-transmit
clp
|
set-mpls-exp-transmit
mpls-exp-value
| set-mpls-exp-topmost-transmit
mpls-exp-topmost-value |
set-mpls-exp-imposition-transmit
mpls-exp-imposition-value |
drop}
For 3900 series ISRs, the following command is used in class-map configuration mode to configure a
specific QoS group value as a match criterion:
specific QoS group value as a match criterion:
match qos-group
qos-group-value
The following command is used in class-map configuration mode to configure a specific match criterion
as the successful match criterion for all packets:
as the successful match criterion for all packets:
match any
Ports Used by QPM
QPM on Windows platform uses the following ports, in addition to the ports used by CiscoWorks
Common Services:
Common Services:
•
51099—JNDI lookup port
•
51199—JRMP lookup port
•
51299—Admin page port
•
43460—Database port
•
49156—EMS database port
•
51399—PDP port
•
61162—SNMP port for RMON traps
•
57001—RMI port for EMS
•
57002—RMI port for Collector Services
If the PDP port (port 51399) is already occupied by other processes or applications, QPM will
automatically bind to the next available port. You can configure the maximum number of retries, the first
and the consecutive ports to be tried when the original port is used by an external application, by editing
the configuration file placed at the following location:
automatically bind to the next available port. You can configure the maximum number of retries, the first
and the consecutive ports to be tried when the original port is used by an external application, by editing
the configuration file placed at the following location:
CSCOpx/MDC/qpm/config/server/jndi.properties
For information about the ports used by CiscoWorks Common Services, see Installing and Getting
Started With CiscoWorks LAN Management Solution 3.1.
Started With CiscoWorks LAN Management Solution 3.1.