Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
285
The layer rate must match the SNC layer rate. This interface performs on a best-effort basis. If
Prime Optical fails to add one or more TPs to the SNC, it generates an UNABLE_TO_COMPLY
exception. The errorReason contains a list of CTPs that failed.
Prime Optical fails to add one or more TPs to the SNC, it generates an UNABLE_TO_COMPLY
exception. The errorReason contains a list of CTPs that failed.
Depending on the card type, the terminology is CTP or FTP. For example, termination points on
CE-MR-6 cards are CTPs when the cards are configured for manual mode. For CE-MR-6 cards
configured for automatic mode, the termination points are FTPs.
CE-MR-6 cards are CTPs when the cards are configured for manual mode. For CE-MR-6 cards
configured for automatic mode, the termination points are FTPs.
Parameters
Name
Type
Input/
Output
Output
Description
sncName
globaldefs::NamingAttributes_T
In
Name of the subnetwork connection to
which to add termination points (either
CTPs or FTPs).
which to add termination points (either
CTPs or FTPs).
zEnd
globaldefs::NamingAttributesList_T
In
List of additional termination points
(either CTPs or FTPs) to add to the SNC.
(either CTPs or FTPs) to add to the SNC.
Throws
Compliance
Prime Optical-defined.
3.9.20 deactivateAndDeleteSNC
Synopsis