Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
324
– Not supported.
• multilayersubnetwork::MLVLANTPDataList_T tpList
– Supported. Specifies the list of all front Ethernet ports and associated service type.
– If the port type on a port cannot be determined, Prime Optical represents the port type as
– If the port type on a port cannot be determined, Prime Optical represents the port type as
L2PortType_T.L2PT_UNKNOWN.
– If the connection type for an ML VLAN on a port cannot be determined, Prime Optical
represents the connection type as L2ConnectionType_T.L2CT_UNKNOWN.
• multiLayerSubnetwork::MLVLANState_T vlanState
– Supported. Valid values are MLVLANState_T.COMPLETE and MLVLANState_T.INCOMPLETE. A
state change event is generated if the VLAN state changes.
• globaldefs::NVSList_T additionalInfo
– Supported. The customer ID and service ID are reported.
Throws
Compliance
Prime Optical-defined.
3.10.2 modifyMLVLANAddFrontPorts
Synopsis
Description
This interface adds additional front ports to the existing MVLAN. An attribute change event is
reported when the front ports are successfully added. Prime Optical does not specify which
attribute of the ML VLAN has changed. The NMS must obtain updated MLVLAN_T structure
information. If the addition of any of the front ports to the ML VLAN fails, Prime Optical
generates a processing failure exception. The NMS user must requery the ML VLAN information
to obtain the new set of parameters associated with the ML VLAN.
reported when the front ports are successfully added. Prime Optical does not specify which
attribute of the ML VLAN has changed. The NMS must obtain updated MLVLAN_T structure
information. If the addition of any of the front ports to the ML VLAN fails, Prime Optical
generates a processing failure exception. The NMS user must requery the ML VLAN information
to obtain the new set of parameters associated with the ML VLAN.