Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
37
2.1.5.4 PTPs
All PTPs are bidirectional for the ONS 15310 MA SONET. The ports are always in channelized
mode. PTPs support In Service and Out of Service–Maintenance values for the service state
attribute.
mode. PTPs support In Service and Out of Service–Maintenance values for the service state
attribute.
SNC provisioning on DS1_28_DS3_3 and DS1_84_DS3_3 cards uses the following DS3/EC1
ports:
ports:
DS1_28_DS3_3—Port numbers 29, 30, and 31.
DS1_84_DS3_3—Port numbers 85, 86, and 87.
2.1.5.5 CTPs
All CTPs are in channelized mode for the ONS 15310 MA SONET.
2.1.5.6 SNCs
CTX cards perform STS and VT1.5 switching. The SNC name cannot exceed 48 characters. The
NE enforces the SNC name character limit.
NE enforces the SNC name character limit.
2.1.5.7 Auto Discovery
The ONS 15310 MA SONET supports automatic discovery of connected elements. Prime Optical
can connect to one node and retrieve information about all connected nodes. The first time
Prime Optical connects to a node, it retrieves only the IP address of the connected node; Prime
Optical does not retrieve the node name. However, Prime Optical must report this element to
the users. Because the IP address is unique, Prime Optical initializes the name of the newly
discovered element with the IP address. An object creation event is generated for this managed
element with the IP address as the name. Later, Prime Optical connects to this element and
retrieves all information, including the actual name, and an AVC event is generated for the
managed element name. The NMS listens to the AVC event for the managed element name and
invokes managedElementManager::ManagedElementManager_I:: getManagedElement.
can connect to one node and retrieve information about all connected nodes. The first time
Prime Optical connects to a node, it retrieves only the IP address of the connected node; Prime
Optical does not retrieve the node name. However, Prime Optical must report this element to
the users. Because the IP address is unique, Prime Optical initializes the name of the newly
discovered element with the IP address. An object creation event is generated for this managed
element with the IP address as the name. Later, Prime Optical connects to this element and
retrieves all information, including the actual name, and an AVC event is generated for the
managed element name. The NMS listens to the AVC event for the managed element name and
invokes managedElementManager::ManagedElementManager_I:: getManagedElement.
2.1.6 ONS 15327
Prime Optical 9.8 supports.
2.1.6.1 Slots
The ONS 15327 is a single-shelf NE with eight slots. The Mechanical Interface Card (MIC) A card
must occupy slot 8; the MIC B card must occupy slot 7. If an integrated Cross-Connect, Timing,
and Control (XTC) card is required, it must occupy slot 5 or slot 6.
must occupy slot 8; the MIC B card must occupy slot 7. If an integrated Cross-Connect, Timing,
and Control (XTC) card is required, it must occupy slot 5 or slot 6.
2.1.6.2 Equipment
All of the cards in the ONS 15327 R5.0 and later display administration and service states. For
earlier software releases, these states are not applicable and Prime Optical displays them as
N/A.
earlier software releases, these states are not applicable and Prime Optical displays them as
N/A.