Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
440
• globaldefs::NVSList_T additionalInfo
– Not supported.
Throws
Compliance
TMF-defined.
3.14.5 createProtectionGroup
Synopsis
Description
This interface enables the NMS to permanently create a protection group in an ME. The
successful result of this operation is the creation of the protection group object. The resulting
object is returned. Prime Optical generates an object creation event upon successful creation of
the protection group.
successful result of this operation is the creation of the protection group object. The resulting
object is returned. Prime Optical generates an object creation event upon successful creation of
the protection group.
Prime Optical supports only the creation of 1_PLUS_1, 1_FOR_N, 1_FOR_1 (a specific case
where the cards are placed in adjacent slots), 2-fiber BLSR, 4-fiber BLSR, SPLITTER, L2_1_PLUS,
and Y-CABLE protection groups.
where the cards are placed in adjacent slots), 2-fiber BLSR, 4-fiber BLSR, SPLITTER, L2_1_PLUS,
and Y-CABLE protection groups.
Prime Optical enables only the creation of 2-fiber and 4-fiber protection groups at the managed
element level and not at the network level.
For 100G_LC, 10x10G_LC, and CFP_LC cards, the following Y-Cable protections are supported:
• TXP_10G (Carpegna card in a standalone configuration) for 10GE and 8GFC payloads only.
• MXP_10x10G (Carpegna and Titano cards in peer configuration) 10GE and 8GFC payloads
• MXP_10x10G (Carpegna and Titano cards in peer configuration) 10GE and 8GFC payloads
only.
• CFP_MXP (Fumaiolo and Titano cards in peer configuration) 40GE payloads only.
• CFP_TXP (Fumaiolo and Titano cards in peer configuration) for 100GE payloads only.
• CFP_TXP (Fumaiolo and Titano cards in peer configuration) for 100GE payloads only.