Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
607
The transmissionParams associated to the layer rate LR_MPLS_PATH (166) reports the two
attributes described in the following table.
attributes described in the following table.
Name
Value
Description
switchState
String
Represents the administrative
switch state: LOCKOUT or CLEAR.
switch state: LOCKOUT or CLEAR.
operState
String
Represents the current
operational state of each cross-
connection: ACTIVE or STDBY.
operational state of each cross-
connection: ACTIVE or STDBY.
The aEnd and zEnd CTPs report the LSP number as LspNum=ddd.
4.10.2.2 getAllSubnetworkConnectionsWithTP
Synopsis
Description
This interface allows the NMS to request a list of LSP SNCs using the specified TP at the
specified connection rates. The LSP layer rate is LR_MPLS_PATH (166). A TP can be a PTP.
Because an MPLS-TP tunnel is terminated in the equipment and not in the PTP, all the MPLS-TP
tunnels that end in the device and suspended by the PTP are returned.
specified connection rates. The LSP layer rate is LR_MPLS_PATH (166). A TP can be a PTP.
Because an MPLS-TP tunnel is terminated in the equipment and not in the PTP, all the MPLS-TP
tunnels that end in the device and suspended by the PTP are returned.
4.10.2.3 getAllSubnetworkConnectionsNamesWithTP
Synopsis