Cisco Cisco Prime Optical 9.8 Developer's Guide
Cisco Prime Optical 9.8 GateWay/CORBA Programmer Reference Guide
OL-29218-01
721
Step 2
Verify that the certificate issued by the client was added to the server keystore.
6.13.4 Adding the Server-Side Certificate to the Client-Side Keystore
Step 1
Enter the following command to add the server-side certificate to the client-side
keystore. (Use FTP or a similar tool to deliver the previously generated
gwcorba_service_cert file from the server. The server-side certificate is located in
the /opt/CiscoTransportManagerServer/cfg directory on the server.)
keystore. (Use FTP or a similar tool to deliver the previously generated
gwcorba_service_cert file from the server. The server-side certificate is located in
the /opt/CiscoTransportManagerServer/cfg directory on the server.)
The command output resembles the following example:
Step 2
Verify that the certificate issued by the server was added to the client keystore.
6.13.5 Configuring the Client-Side Properties
To enforce SSL, complete the following configuration on the client-side jacorb.properties file.
To enforce SSL, the supported and required options must be set to 60.
No changes are required to the server-side jacorb.properties file, because it has already been
No changes are required to the server-side jacorb.properties file, because it has already been
changed.