Cisco Cisco Prime Optical 9.6 Developer's Guide
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
293
Parameters
Name
Type
Input/
Output
Description
ochccProtectedConstrain
ts
multiLayerSubnetwork::
OCHCCProtectedConstraints
_T
In
Structure containing ME
include/exclude route
constraints.
other
—
—
Same as for
createAndActivateSNCFromUserL
abel.
Prime Optical supports the following layer rates:
• ONS 15454 SONET: LR_OCH_Transport_Unit
• ONS 15454 SONET: LR_OCH_Transport_Unit
• ONS 15454 SDH: LR_OCH_Transport_Unit
Compliance
Prime Optical-defined.
Compliance
Prime Optical-defined.
3.9.19 addDrops
Synopsis
void addDrops(
in globaldefs::NamingAttributes_T sncName,
in globaldefs::NamingAttributesList_T zEnd)
raises(globaldefs::ProcessingFailureException);
Description
This proprietary interface supports SNCs with multiple drops for the ONS 15310, ONS 15327,
This proprietary interface supports SNCs with multiple drops for the ONS 15310, ONS 15327,
and ONS 15454. There are two steps to create an SNC with multiple drops:
Invoke the operation described in
Invoke the operation described in
unidirectional SNC between two nodes.
Invoke this operation to add new drop points to an existing SNC.
The layer rate must match the SNC layer rate. This interface performs on a best-effort basis. If
Invoke this operation to add new drop points to an existing SNC.
The layer rate must match the SNC layer rate. This interface performs on a best-effort basis. If
Prime Optical fails to add one or more TPs to the SNC, it generates an UNABLE_TO_COMPLY
exception. The errorReason contains a list of CTPs that failed.
Depending on the card type, the terminology is CTP or FTP. For example, termination points on
Depending on the card type, the terminology is CTP or FTP. For example, termination points on
CE-MR-6 cards are CTPs when the cards are configured for manual mode. For CE-MR-6 cards
configured for automatic mode, the termination points are FTPs.
Parameters
Parameters
Name
Type
Input/
Output
Description
sncName
globaldefs::NamingAttributes_T
In
Name of the subnetwork connection to