Cisco Cisco Prime Optical 9.6 Developer's Guide
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
335
3.10.4 modifyMLVLANPortState
Synopsis
void modifyMLVLANPortState(
in globaldefs::NamingAttributes_T mlVlanName,
in multiLayerSubnetwork::MLVLANPortStateList_T tpPortStateList,
out multiLayerSubnetwork::MLVLAN_T mlVlan)
raises(globaldefs::ProcessingFailureException);
Description
This interface enables or disables specified ML VLAN traffic on the specified list of front ports.
This interface enables or disables specified ML VLAN traffic on the specified list of front ports.
An attribute change event is reported when one of the ML VLAN parameters is modified. Prime
Optical does not specify which attribute of the ML VLAN has changed. The NMS must obtain
updated MLVLAN_T structure information. If modification of any of the ML VLAN port states
fails, Prime Optical generates a processing failure exception. The NMS user must requery the
ML VLAN information to obtain the new set of parameters associated with the ML VLAN.
Parameters
Parameters
Name
Type
Input/
Output
Description
mlVlanName
globaldefs::NamingAttributes_T
In
Name with which to
create the ML VLAN.
tpPortStateList
multiLayerSubnetwork::MLVLANTPPortStateList_T
In
List of front ports on
which to modify the
port state for the
specified ML VLAN.
mlVlan
MultiLayerSubnetwork::MLVLAN_T
Out
ML VLAN object
returned after
modification.
Prime Optical support for MLVLANTPPortState_T structure is as follows:
• globaldefs::NamingAttributes_T tpName
• globaldefs::NamingAttributes_T tpName
The front Ethernet port name used by this ML VLAN.
• L2PortState_T portState
The portState is applicable only to the specified ML VLAN. The supported states are:
– L2PortState_T.L2PS_ENABLE
– L2PortState_T.L2PS_DISABLE
Throws
globaldefs::ProcessingFailureException