Cisco Cisco Prime Optical 9.6 Developer's Guide
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
40
Primary States (PST-PSTQ)
Attribute Value
Meaning
Out of Service–Autonomous and
Management (OOS_AUMA)
The entity is not operational due to an autonomous event and
has been administratively removed from service.
Table 2-6: Equipment Service State–Secondary (ONS 15327)
Secondary States (SST)
Attribute Value
Meaning
Unassigned (UAS)
The entity is not provisioned in the database.
Unequipped (UEQ)
The entity has been removed, leaving an empty slot. It may or
may not be assigned (provisioned).
Mismatch of Equipment and
Attributes (MEA)
Incorrect equipment is installed. For example, the card plugged
in is not compatible with the provisioned card or slot.
Automatic In-Service (AINS)
The entity is in a delay transition (to IS) state. The transition to
IS is pending the correction of off-normal conditions on the
entity.
Maintenance (MT)
The entity has been manually removed from service for
maintenance. It is still capable of performing its provisioned
functions. Traffic is still carried.
Disabled (DSBLD)
The entity has been manually removed from service and cannot
perform its provisioned functions. All of its provisioned services
are disrupted. Traffic is not carried.
Loopback (LPBK)
The loopback command is in effect (any loopback type).
2.1.6.3 XTC Cards
The XTC-14 card has 14 DS1 ports numbered 1 through 14. Only VT1.5 SNCs can be created on
these ports. The XTC-28-3 card has 28 DS1 ports numbered 1 through 28 and 3 DS3 ports
numbered 29 through 31. VT1.5 SNCs can be created on DS1 ports, and STS-1 SNCs can be
created on DS3 ports.
2.1.6.4 PTPs
All PTPs are bidirectional for the ONS 15327. The ports are always in channelized mode. PTPs
support In Service, Out of Service, Out of Service–Maintenance, and Auto in Service values for
the service state attribute.
2.1.6.5 CTPs
All CTPs are in channelized mode for the ONS 15327. Alarm monitoring cannot be turned on or
off for CTPs.