Cisco Cisco Prime Optical 9.6 Developer's Guide
Cisco Prime Optical 9.6.3 GateWay/CORBA Programmer Reference Guide
OL-28047-01
611
The following table describes the additionalInfo parameters.
Parameter Name
Valid
Values
Description
workLspName
String
Name of the working LSP circuit.
workLspSid
Integer
SID of the working LSP circuit.
workLspUniqueID
Integer
Unique ID of the working LSP circuit.
workLspNum
Integer
Working LSP number.
protLspName
String
Name of the protected LSP circuit.
protLspSid
Integer
SID of the protected LSP circuit.
protLspUniqueID
Integer
Unique ID of the protected LSP circuit.
protkLspNum
Integer
Protected LSP number.
tunnelKey
String
The tunnel key is composed in the following format:
sourceNodeId:SourceTunNum:DestNodeId:DestTunNum
ServiceID
Integer
The service ID associated by the network to the service.
aEnd and zEnd CTPs report as Prime Optical native name. The tunnel number must be in the
following format: TunnelNum=ddd.
The following are possible values for the SNC state:
• Pending—The SNC has been created by an NMS and has not been activated by any NMS, or
The following are possible values for the SNC state:
• Pending—The SNC has been created by an NMS and has not been activated by any NMS, or
the SNC has been successfully deactivated by an NMS. This state has no relationship with
the network state of the SNC cross-connections.
• Partial—The SNC is not in pending state. A route has not been assigned to the SNC, or not
all of the SNC cross-connections are active in the network. This may or may not include
activated SNCs for which there are currently no active cross-connections in the network. A
TP tunnel without any LSPs configured is in partial state.
• Active—The SNC is not in pending state. A route has been assigned to the SNC, and all SNC
cross-connections are active in the network.
4.10.1.2 getAllSubnetworkConnectionsWithTP
Synopsis
public void getAllSubnetworkConnectionsWithTP(
NameAndStringValue_T[]
tpName,
short[]
connectionRateList,
int
how_many,