Cisco Cisco Prime Optical 10.3 Developer's Guide
Cisco Prime Optical 10.3 GateWay/CORBA Programmer Reference Guide
303
Optical generates a processing failure exception. You must issue another query for the ML
VLAN information to obtain the new set of parameters associated with the ML VLAN.
Parameters
VLAN information to obtain the new set of parameters associated with the ML VLAN.
Parameters
Name
Type
Input/Output
Description
mlVlanName
globaldefs::NamingAttributes_T
In
Name with which to create
the ML VLAN.
the ML VLAN.
tpRstpStateList
multiLayerSubnetwork::
MLVLANTPrstpStateList_T
MLVLANTPrstpStateList_T
In
List of front ports on which
the RSTP state must be
modified for the specified
ML VLAN.
the RSTP state must be
modified for the specified
ML VLAN.
mlVlan
MultiLayerSubnetwork::MLVLAN_T
Out
ML VLAN object returned
after modification.
after modification.
Prime Optical support for MLVLANRSTPState_T structure is as follows:
• globaldefs::NamingAttributes_T tpName
• globaldefs::NamingAttributes_T tpName
– The front Ethernet port name used by this ML VLAN.
• L2RSTPState_T rstpState
– The rstpState is applicable only to the specified non-QinQ drops of the ML VLAN. The
supported states are:
L2RSTPState_T.L2RSTP_ENABLE
L2RSTPState_T.L2RSTP_DISABLE
Throws
Compliance
Prime Optical-defined.
Prime Optical-defined.
3.10.6 modifyMLVLANTPQOS
Synopsis
Description