Cisco Cisco Prime Optical 10.3 Developer's Guide
Cisco Prime Optical 10.3 GateWay/CORBA Programmer Reference Guide
319
AvvidVoiceVideoCoS
AvvidControlCoS
CosCommit
Group1CoS
Group2CoS
Group2Bandwidth parameters must be entered along with Group1Bandwidth
parameters. Entering Group2Bandwidth alone creates inconsistency in the L2 topology
table.
table.
If the topology is DOT17_RPR, multicast bandwidth parameters are not supported;
Group1Bandwidth and Group2Bandwidth values are not needed. Group1CoS and Group2CoS do
not apply to DOT17_RPR. For DOT17_RPR topologies, you can specify the absolute bandwidth
values for the three possible classes of traffic (A Reserved, A1, and B Committed). For the
remaining bandwidth parameters, you specify to which class of traffic (Class A, B, or C) the
parameter belongs. For example, ClassSpMgmt belongs to Class C-type traffic.
Throws
Group1Bandwidth and Group2Bandwidth values are not needed. Group1CoS and Group2CoS do
not apply to DOT17_RPR. For DOT17_RPR topologies, you can specify the absolute bandwidth
values for the three possible classes of traffic (A Reserved, A1, and B Committed). For the
remaining bandwidth parameters, you specify to which class of traffic (Class A, B, or C) the
parameter belongs. For example, ClassSpMgmt belongs to Class C-type traffic.
Throws
Compliance
Prime Optical-defined.
Prime Optical-defined.
3.10.17 deleteL2Topology
Synopsis
Description
This interface provides a method to delete an L2 topology and all the SNCs associated with it. If
there are any ML VLANs associated with the L2 topology when this interface method is
invoked, Prime Optical generates a processing failure exception. The NMS must ensure that
there are no ML VLANs associated with the L2 topology, to ensure that the L2 topology is
successfully deleted.
Parameters
This interface provides a method to delete an L2 topology and all the SNCs associated with it. If
there are any ML VLANs associated with the L2 topology when this interface method is
invoked, Prime Optical generates a processing failure exception. The NMS must ensure that
there are no ML VLANs associated with the L2 topology, to ensure that the L2 topology is
successfully deleted.
Parameters