Cisco Cisco Evolved Programmable Network Manager 1.2 Release Notes
8
Cisco Evolved Programmable Network Manager 1.2 Maintenance Pack 6 (V. 1.2.600) Release Notes
Install Cisco EPN Manager 1.2. MP6 (High Availability)
(admin) root
b.
Enter the following:
ls -a /opt/CSCOlumos
c.
If the .standbyDBCreated file is listed in the output, enter the following:
rm /opt/CSCOlumos/.standbyDBCreated
d.
Log back in as the CLI admin user.
su admin
e.
Restart Cisco EPN Manager.
(admin) ncs start
f.
Verify that the secondary server has restarted.
g.
Run the ncs status command and make sure that the Health Monitor process is restarted.
Step 9
(After both servers have restarted) On the primary server, reconfigure high availability.
a.
Log into Cisco EPN Manager as a user with Administrator privileges.
b.
From the left sidebar, choose Administration > Settings > High Availability.
c.
Click HA Configuration on the left, then enter the secondary server’s IP address, the secondary
server’s authentication key, and an email address to which Cisco EPN Manager should send HA state
change notifications.
server’s authentication key, and an email address to which Cisco EPN Manager should send HA state
change notifications.
d.
Click Save, then wait until the servers are synchronized.
e.
Verify that the Configuration Mode is HA Enabled.
Step 10
Make sure the secondary server is synchronized with the primary server by checking the secondary
server’s Health Monitor page.
server’s Health Monitor page.
a.
Log in to the secondary server’s HM web page by entering the following URL in your browser:
https://serverIP:8082
where serverIP is the IP address or host name of the secondary server.
b.
Enter the authentication key and click Login.
c.
Verify that the Current State Mode is Secondary Syncing (with a green check mark).
Step 11
Verify the HA status on the primary and secondary servers by running the ncs ha status command on
both servers. You should see the following:
both servers. You should see the following:
•
The primary server state is Primary Active.
•
The secondary server state is Secondary Syncing.