Cisco Cisco Evolved Programmable Network Manager 1.2 Developer's Guide
[Type text]
Cisco EPN Manager OSS Integration Guide for MTOSI
112
Post-Condition: On a successful setIntentedRoute (upgradeRestore) the current restoration path will be set
as the working path. Restoration Status will be set to NONE.
as the working path. Restoration Status will be set to NONE.
4.16.1.2.2
Exceptions:
internalError: Indicates that an internal error or exception has occurred as part of this call.
invalidInput: Indicates that the input given to the operation is invalid.
notImplemented: Indicates that the operation is not implemented by the management system.
Note: The setIntendedRoute operation is provided to perform an Upgrade And Restore operation on a given
service (OCHTRAIL or OCHNC nnly). This is a deviation from the standard support provided by the
setIntendedRoute API.
invalidInput: Indicates that the input given to the operation is invalid.
notImplemented: Indicates that the operation is not implemented by the management system.
Note: The setIntendedRoute operation is provided to perform an Upgrade And Restore operation on a given
service (OCHTRAIL or OCHNC nnly). This is a deviation from the standard support provided by the
setIntendedRoute API.
4.17 ProtectionProfileControl
The interface provides operations to control a Protection Profiles.
4.17.1 ProtectionProfileDataType
The following table lists the Protection Profile data that can be created, modified and retrieved by the
interface.
interface.
ProtectionProfileData
Data Type
Description
profileName
String
Protection Profile Name
protectionType
String
APS Protection Type, possible values:
1-plus-1-BDIR-APS
1-plus-1-UNIDIR-APS
1-plus-1-UNIDIR-NO-APS
1-plus-1-plus-R-BIDIR-APS
protectionMode
String
APS Protection Mode. Possible values:
Revertive
Non-Revertive
holdOffTimer
Long
Hold-off timer in seconds. Range 100-10000
waitToRestoreTimer
Long
Wait to restore timer in seconds. Range 0-720
sncConnectionMode
String
Sub-Network Connection Mode, possible values:
SNC-I
SNC-N
SNC-S
ciscoConnectionCon
trolUpgradeRestore
trolUpgradeRestore
CiscoConnectionCont
rolUpgradeRestoreTy
pe
rolUpgradeRestoreTy
pe
controlCommand
String
The Command issued
controlCommandMe
ssage
ssage
String
The message returned from the command execution.
controlCommandRe
sult
sult
String
True /False to indicate the success/failure status of the
command.
command.
controlDevice
String
The device on which the action was performed.